Further Reading

If you're seriously considering a DIY standing-seam roof installation, you'd best bone up on your general knowledge regarding what is undoubtedly a great roofing solution. While successful amateur installations are not unheard of, your surest bet is to seek the help of a professional. Standing-seam roofs are made of numerous interlocking panels, which run vertically from the ridge, or edge, of the roof to its apex at the eave. The seam where any two panels interlock is raised just above the surface of the roof, allowing water to run off the roof without it dripping in between the panels. This simple structure belies numerous details of installation that, if not properly attended to, can lessen the efficacy and lifespan of the roof.

Also, should you choose to hire a professional accomplished in the craft of roofing, you're probably not going to find yourself looking at roof installation costs that are anywhere near as expensive as those of ordinary clay or fiber-glass shingle installation. Metal roofs in general and standing-seam roofs in particular are lightweight (between 1 and 2 pounds apiece), making them very easy to move around. They can also be installed over the old roof, which eliminates the time and manpower it might have required to tear the whole previous layer of roof off.

Properly installed, standing seam roofs are watertight, immune to the forces of wind and hail, fire retardant and require virtually zero maintenance aside from the odd hose-down every year or so. Indeed, they so improve the safety of your home that many insurance companies are willing to cut large amounts of money off the cost of their policies for homes with metal roofs.

Now that that's all done, you're ready to start worrying about the shingles, or roof paneling. Ask around at the construction outlet or hardware store where you first procured your shingles and find someone that can demonstrate the manner in which the shingles need to be fitted together. If you haven't bought the materials yet, you should know that there are a bunch of companies that make panel solutions that are really easy to clip into place, designed for DIY standing-seam roof installation and requiring nothing but your hands and perhaps the most rudimentary assortment of tools. Check out the website of Permanent Roofing Systems (permanentroofing.com), where you'll find a PDF full of DIY metal roof installation tips available for download and instant reference.

If your roof is irregularly constructed - with features like skylights, dormers or chimneys - then you need to reconsider what your goal is in doing this job on your own. In such cases, pre-made shingles just aren't going to be enough to cover the entire roof surface. The irregular areas are going to require custom-cut shingles, and working with a saw and some chalk just isn't going to be enough. What's needed is hydraulic shear called a break, a portable device used by professionals to shape standing-seam panels on-site, a feat that would take a human ten times as long to replicate.

That said, there are going to be certain circumstances under which pre-made shingles just won't be enough, and that's when you need to swallow your pride and call in the pros. On roofs with irregularities - things like sidewalls, chimneys, dormers and skylights - standing seam panels will need to be cut to size on-site, which requires the use of a sophisticated piece of machinery called a brake - a hydraulic shear with teeth sharp enough to cut panels to just the right length without damaging their ends. That's one feat it's very difficult for a human saw-wielder to replicate.

So maybe, on just this one occasion, it's the time to loosen those fists and hand over the cash for a skilled roofer's work. Indeed, if your worker as recommended by the manufacturer, or at least is recognized as qualified to install standing seam roof panels, it'll mean that your roof is subject to warranty - and that you can look forward to fifty or more years of being secure in the knowledge that you've a strong roof over your head.

For more interesting articles on DIY Standing-Seam Roof Installation check out www.DurableMetalRoofs.com