Further Reading

DIY standing-seam metal roof installation - to someone experienced in the industry, odds are these words would sound ludicrous. The fact is, there have been a lot of people trying of late, and a lot of people failing. The motivation of these would-be MacGyvers is obvious enough - they're hoping to make a saving on the metal roofing contractor they won't need to hire, followed by the further savings in terms of electric bills and insurance policies that having a metal roof puts you in for.

While the frugal thinking that informs these efforts is admirable, there are a lot of good reasons you should find some other way to diminish your metal roofing costs. While there are a few companies out there that make metal roofing shingles specifically designed for the amateur to install (from panels that pretty much clip together by hand to those requiring little more than the standard tool arsenal of screw gun, hammer, metal snips, caulk gun, and tape measure) these uniformly shaped shingles will only work on homes with a very regular roofing structure.

But your typical home doesn't have that. Odds are your home has a sidewall, a chimney, a dormer or a skylight somewhere up there, and the average homeowner trying to work around such structural irregularities without any panel-reshaping is almost bound to leave weak spots that make the internal structure of the roof vulnerable to water damage, possibly decreasing the lifespan of a roof which, properly installed, could last half a century without maintenance. The cost of installing a metal roof on your own could, in reality, be that you'll need to get the entire job redone by a professional. When even a simple mistake like leaving a mark on one of your metal panels with a lead pencil instead of duct tape can lead to massive corrosion and compromise the integrity of the roof, is it really a risk you want to take?

Unless you live in an A-frame or some kind of featureless box of a home, getting a metal roofing contractor in on the action is often the best thing to do. Since installing a metal roof is relatively easy (the panels are so lightweight and require so little work to fit together) your contractor is probably not going to need as much time as he would take on an ordinary, clay and fiberglass job, and thus, since most contractors charge by the day, will most likely charge you much less.

If he doesn't, and if he isn't willing to budge from what you take to be an unreasonable price, start shopping. Your first stop should be your family, friends and anyone you know with ties to the construction and renovation industry. Don't be afraid to tap these connections, as with a referral you stand the best chance of getting good service - the contractor is more likely to see you as representative of a body of past or potential customers, and so will be more interested in impressing you with his strong skills and reasonable rates than in taking you for everything that you have.

The best tool for cutting and shaping metal roofing panels on-site is called a brake, and you need to make absolutely sure that your metal roofing contractor is using one, as without it you'll be left with poorly-cut panels and a job that stretches out far longer than it should. The hydraulic powered teeth of the brake cut panels perfectly without deforming their ends, leaving you with the neatest, most aesthetically appealing roof-shaping you could hope for.

Read more advice about Installing a Metal Roof and Metal Roofing Contractors at DurableMetalRoofs.com.