Further Reading

Composed of numerous panels or shingles that lock into one another on the vertical axis, the lines of a standing-seam roof run from the edge of the roof to its peak. Water is prevented from leaking or pooling on the roof by the presence of the design's characteristic crimped panel-edges, which are raised off the surface of the roof and thus prevent water from seeping between the panels. Yet, despite the apparently simplistic principles behind its structure, a DIY standing seam roof installation will probably sound like a rather loony idea to anyone in the industry.

And indeed, while getting hold of the roof components might be a bit expensive, the installation is the exact opposite. Indeed, metal roofing panels of the standing seam variety are very light - often no more than a pound - and as such your contractor's not going to charge you anything near the rates he would installing heavy traditional materials. If he does, well, he's trying to stiff you, and you need to shop around for a new contractor. When you don't even need to remove the old roofing materials to install a new layer, there can be no cause for amplified up costs beyond the belief that you're dealing with affluent, gullible customers.

This is why a DIY standing-seam roof installation is just more trouble than it's worth. But if you're not convinced and intent to push through with your project, here's some metal roof installation tips. After you lay down your waterproof plastic membrane (an essential feature for making sure you don't let any water through your roof), you'll need to chase it with a layer of roofing paper, which you must ensure covers every nook and cranny including the spaces between the different roof surfaces (the roof valleys). One part of the job you'll definitely want to done for you (unless it's your goal to become a professional roofer and you're just practicing on your own home) is the making of ridge-cap, which is preformed to fit over the roof's peak. Once this groundwork has been laid, you're ready for the shingles.

You should find a professional at your local hardware or construction outlet to demonstrate just how to fit the shingles together. The most visually stunning configuration you can arrange panels in is a staggered pattern. You can find panel solutions, such as those made by Permanent Roofing Systems, that take a lot of the guesswork out of this process, as they can pretty much be clipped together by hand. Designed for the construction amateur, these four-way shingles often come pre-assembled in multi-shingle sheets, greatly reducing the labor you'll be required to undertake. Go to permanentroofing.com for a downloadable PDF full of DIY standing seam roof installation tips.

When it comes to shingles, there are a few companies, such as Permanent Roofing Systems, that design shingles specifically made for DIY metal roof installation. There are four-way systems of shingles that can be made to interlock with each other by hand or with minimal use of tools. Get someone from the manufacturer, or a qualified person at your local construction outlet, to show you how to fit the pieces together, which should be in a staggered pattern for the best visual effect. The same company circulates a PDF choc-full of useful DIY metal roof installation tips available for download at www.permanentroofing.com. It's possible to buy their shingles pre-assembled in sheets, making for the easiest possible solution to your roofing needs.

Should you attempt to do the job yourself, the most likely result will be a standing seam roof that either looks slapped together or else is easily damaged by leaking or swelling ice caught between panels. This is when the cost of DIY standing-seam roof installation can actually outstrip that of professionals - because you'll probably need to redo the entire job at some point.

If under such circumstances you persist in your DIY efforts, the odds are that patch jobs around irregular areas are either going to look bad or result in your standing-seam roof being compromised, leading to leaking and other forms of weather damage, such as the negative effects that swelling ice can cause when caught between panels. Properly installed standing-seam roofs are subject to warranties of up to fifty years, given the nigh-on invulnerable hardiness of the materials. So don't skimp now - a once-off investment could leave you with a roof that lasts a lifetime.

For more interesting articles on DIY Standing-Seam Roof Installation check out www.DurableMetalRoofs.com