Further Reading

If you're seriously considering a DIY standing-seam roof installation, you'd best bone up on your general knowledge regarding what is undoubtedly a great roofing solution. While successful amateur installations are not unheard of, your surest bet is to seek the help of a professional. Standing-seam roofs are made of numerous interlocking panels, which run vertically from the ridge, or edge, of the roof to its apex at the eave. The seam where any two panels interlock is raised just above the surface of the roof, allowing water to run off the roof without it dripping in between the panels. This simple structure belies numerous details of installation that, if not properly attended to, can lessen the efficacy and lifespan of the roof.

Also, should you choose to hire a professional accomplished in the craft of roofing, you're probably not going to find yourself looking at roof installation costs that are anywhere near as expensive as those of ordinary clay or fiber-glass shingle installation. Metal roofs in general and standing-seam roofs in particular are lightweight (between 1 and 2 pounds apiece), making them very easy to move around. They can also be installed over the old roof, which eliminates the time and manpower it might have required to tear the whole previous layer of roof off.

This is why a DIY standing-seam roof installation is just more trouble than it's worth. But if you're not convinced and intent to push through with your project, here's some metal roof installation tips. After you lay down your waterproof plastic membrane (an essential feature for making sure you don't let any water through your roof), you'll need to chase it with a layer of roofing paper, which you must ensure covers every nook and cranny including the spaces between the different roof surfaces (the roof valleys). One part of the job you'll definitely want to done for you (unless it's your goal to become a professional roofer and you're just practicing on your own home) is the making of ridge-cap, which is preformed to fit over the roof's peak. Once this groundwork has been laid, you're ready for the shingles.

You should find a professional at your local hardware or construction outlet to demonstrate just how to fit the shingles together. The most visually stunning configuration you can arrange panels in is a staggered pattern. You can find panel solutions, such as those made by Permanent Roofing Systems, that take a lot of the guesswork out of this process, as they can pretty much be clipped together by hand. Designed for the construction amateur, these four-way shingles often come pre-assembled in multi-shingle sheets, greatly reducing the labor you'll be required to undertake. Go to permanentroofing.com for a downloadable PDF full of DIY standing seam roof installation tips.

Now, all this is well and good until you realize that your roof isn't regularly shaped. And I'll tell you, most peoples' roofs fall into the category of irregular. Just about everyone's roof has some kinky little feature, like a skylight or a chimney or a dormer, that needs to have pre-made shingles cut in accordance with its shape. Should you attempt to use your regular shingles without consideration for the unique requirements of these areas, you're going to end up with a roof that is either ugly or practically ineffectual. The fact is, the tool for this job is not a saw or a hammer, it's a hydraulic powered shear with teeth sharper than razor blades that trained professionals use to quickly cut standing seam roofing panels to size on site. It's called a brake, and it's the reason you want a pro doing this kind of a job.

That said, there are going to be certain circumstances under which pre-made shingles just won't be enough, and that's when you need to swallow your pride and call in the pros. On roofs with irregularities - things like sidewalls, chimneys, dormers and skylights - standing seam panels will need to be cut to size on-site, which requires the use of a sophisticated piece of machinery called a brake - a hydraulic shear with teeth sharp enough to cut panels to just the right length without damaging their ends. That's one feat it's very difficult for a human saw-wielder to replicate.

So don't be tight-fisted now. Well installed standing seam roofs often come with manufacturer-warranties of up to fifty years - assuming the roof was installed by a certified professional. A once-off payment now could be the key to a home that retains its value for decades.

For more interesting articles on DIY Metal Roof Installation Tips check out www.DurableMetalRoofs.com